Layer 04 · Observe

Electric ISR drone

The GIS E VTOL 3.25: a quiet, electric, vertical take off and landing aircraft for intelligence, surveillance and reconnaissance. Fully designed and manufactured by GIS in Bulgaria, available from the first quarter of 2027.

GIS design · made in BulgariaIn production Q1 2027
Electric ISR drone
What it is

Electric ISR, designed and built by GIS.

Intelligence, surveillance and reconnaissance (ISR) means seeing first and understanding first: watching a border, a coastline, a pipeline or a battlefield and sending live imagery to the people who decide.

The E VTOL 3.25 is a GIS product from the first drawing to the finished aircraft. It takes off and lands vertically like a multicopter, then flies efficiently on its wing like an aeroplane, so it needs no runway, no catapult and no parachute. It carries up to 5 kg of sensors for up to three hours and 250 km.

Electric propulsion makes the aircraft quiet and gives it a low heat signature, so it is hard to hear and hard to see from the ground. Fewer moving parts than a combustion engine mean simpler maintenance and faster turnaround between missions.

Design

Built around the mission.

01Vertical take off and landingFour electric lift motors on carbon booms lift the aircraft vertically, so it needs no runway, catapult or parachute. It takes off and lands from a clearing, a ship deck or a vehicle.
02Efficient forward flightOnce airborne, a single pusher motor drives the aircraft on its 3.25 m wing for up to three hours, covering up to 250 km on one battery.
03Quiet electric powerElectric propulsion is quiet and has a low heat signature, so the aircraft is hard to hear and hard to see from the ground. Fewer moving parts mean simpler maintenance.
04Payload bay and sensorsA central payload compartment takes up to 5 kg of sensors: a stabilised day and night camera, and lidar for mapping. Hatches give quick access to the payload and the batteries.
05Precision landingA dedicated landing lidar measures height above the ground for precise automatic landing, while GPS, a pitot tube and redundant electronics support autonomous flight.
06V tail and wide wingA ruddervator tail and large ailerons give stable, efficient flight in wind, and the airframe breaks down for transport in a single vehicle.
Specifications

E VTOL 3.25 at a glance.

Figures are those of the production configuration. Detailed data sheets, payload options and export licensing information are provided to qualified government and commercial customers on request.

ConfigurationFixed wing with vertical take off and landing (VTOL)
PropulsionElectric: four VTOL motors and one pusher motor
Wingspan3.25 m
Length1.90 m
Maximum take off mass24 kg
Empty weight, without battery and payload10 kg
Maximum payload, battery excluded5 kg
Endurance3 hours
Range250 km
Cruise speed22 to 25 m/s (79 to 90 km/h)
Stall speed17 m/s
Maximum operating altitude3,000 m
AvailabilityFirst quarter of 2027
Design and productionGIS, Bulgaria
In the field

Quiet, electric and ready in minutes.

Photographic visualisations of the production aircraft, created from the GIS engineering model. Series production begins in the first quarter of 2027.

Vertical take off from a field, lift rotors running
01 · Vertical take off from a field, lift rotors running
Cruise flight on the wing, pusher motor running
02 · Cruise flight on the wing, pusher motor running
On the ground before a sortie
03 · On the ground before a sortie
Studio views

Every angle of the E VTOL 3.25.

Studio visualisations of the production aircraft, created from the GIS engineering model.

Front three quarter view
01 · Front three quarter view
Rear three quarter view
02 · Rear three quarter view
Side view
03 · Side view
Top view, wing and lift booms
04 · Top view, wing and lift booms
Detail: canopy, wing root and lift motors
05 · Detail: canopy, wing root and lift motors
Low side view, landing gear
06 · Low side view, landing gear
How it works

From take off to landing in five steps.

01PlanThe mission and area of interest are loaded at the ground control station.
02Take offThe aircraft lifts off vertically from a small clearing, a vehicle or a ship deck.
03TransitionThe pusher motor takes over and the aircraft flies on its wing to the patrol area.
04ObserveDay and night sensors and lidar stream live video and data to the ground station.
05LandThe aircraft returns and lands vertically, guided by its landing lidar; batteries are swapped.
Made in Bulgaria

Designed by our engineers. Built in our own facility.

The E VTOL 3.25 is designed and manufactured by GIS in Bulgaria, inside the European Union. Design, assembly, testing and quality control happen under one roof, so we control every part of the product and can adapt it to each customer. Series deliveries begin in the first quarter of 2027.

Manufacturing facility, general view

Reserve production slots for 2027. Briefings and demonstrations for qualified customers.

Request a consultation